 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Optoway FEATURES l Duplex LC Multi-Mode Transceiver l Compliant with Fibre Channel FC-PH-2 for 200-M5-SN-1 and 200-M6-SN-1 l Compliant with IEEE 802.3z 1000BASE-SX l Link Distance at 2.125 Gbd 150 m links with 62.5/125 m MMF Cables 300 m links with 50/125 m MMF Cables l Link Distance at 1.026 Gbd 300 m links with 62.5/125 m MMF Cables 500 m links with 50/125 m MMF Cables l Small Form Factor, RJ-45 size, 2X5 pin Package l AC/AC Coupled Signal Input / Output l LVTTL Transmitter Disable Input l LVTTL Signal Detection Output l Single +3.3 V Power Supply l RoHS Compliant l 0 to 70oC Operating: TRML-9100FG l -20 to 85oC Operating: TRML-9100FAG l Wave Solderable and Aqueous Washable l Class 1 Laser International Safety Standard IEC-60825 Compliant TRML-9100FG 1 *********************************************************************************************************************************************************************** TRML-9100FG / TRML-9100FAG 3.3V / 850 nm / 2.5 Gbps RoHS Compliant SFF LC MULTI-MODE TRANSCEIVER ********************************************************************************************************************************************************************** DESCRIPTION The TRML-9100FG series multi-mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as Fibre Channel FC-PH-2 for 200-M5-SN-1 and 200-M6-SN-1 and Gigabit Ethernet IEEE 802.3z 1000BASE-SX. This module is designed for multi-mode fiber and operates at a nominal wavelength of 850 nm. The transmitter section uses a multiple quantum well 850 nm VCSEL and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated GaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. LASER SAFETY This multi-mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l SONET/SDH Equipment Interconnect l Gigabit Ethernet 1.25 Gb/s Links ORDER INFORMATION P/No. TRML-9100FG TRML-9100FAG Bit Rate (Gb/s) 2.125/1.063 2.125/1.063 FC-PI 200/100 200/100 Distance Wavelength (m) (nm) 150/300* 150/300* 850 850 Package 2X5 LC 2X5 LC Temp. (oC) 0 to 70 -20 to 85 TX Power RX Sens. RoHS (dBm) (dBm) Compliant -4 to -9 -15 Yes -4 to -9 -15 Yes Note: 150 m links with 62.5/125 m MMF Cables and 300 m links with 62.5/125 m MMF Cables. Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Soldering Temperature Power Supply Voltage Input Voltage Symbol Tstg Topr --Vcc --Min -40 0 -20 0 GND Max 85 70 85 260 4.5 Vcc Units o C o C o Notes TRML-9100FG TRML-9100FAG 10 seconds on leads only C V V Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Data Rate Power Supply Current Symbol Vcc Topr Min 3.13 0 -20 1 Typ 3.3 Max 3.47 70 85 240 Units / Notes V o C / TRML-9100FG o C / TRML-9100FAG Gb/s mA Icc 2.125 180 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V2.0 Optoway Transmitter Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Optical Modulation Amplitude Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Electrical Data Input Current - Low Data Input Current - High Differential Input Voltage Data Input Voltage - Low Data Input Voltage -- High Disable Input Voltage -- Low Disable Input Voltage -- High Shut Off Time for TxDis Symbol Min Typ --850 --9 Max -4 860 0.85 --150 150 -117 Units dBm nm nm W dB ps ps dB/Hz A A mV V V V V ms Po -9 830 -- OMA 196 ER Compliant with IEEE 802.3z tr tf RIN IIL IIH VIH - V IL VIL - V CC VIH - V CC VTDIS,L VTDIS,H tDIS -350 350 300 -2.0 -1.1 0 Vcc - 1.3 -1.58 -0.74 0.5 Vcc 1 TRML-9100FG 2 *********************************************************************************************************************************************************************** Notes 1 RMS () 2 20% to 80% 20% to 80% 3 3 TX Output Enabled TX Ouput Disabled Notes: 1. Output power is power coupled into a 62.5/125 m MM fiber. 2. An OMA of 196 W is approximately equal to an average power of -9 dBm assuming an Extinction Ratio of 9 dB. 3. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Electrical Data Output Voltage - Low Data Output Voltage - High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol --Pin Pa Pd Min --0 ---31 1.0 1100 -2.0 -1.1 2.0 Typ ----------Max -15 ---15 --1600 -1.58 -0.74 0.5 Units dBm dBm dBm dBm dB nm V V V V Notes 1 Transition: low to high Transition: high to low VOL - VCC VOH - VCC VOL VOH 2 2 Notes: 1. Minimum sensitivity and saturation levels at BER=1E-12 for a 27-1 PRBS. 2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V2.0 Optoway CONNECTION DIAGRAM TRML-9100FG 3 *********************************************************************************************************************************************************************** PIN 1 2 3 4 5 6 7 8 9 10 MS Symbol VEEr VCC r SD RD- RD+ VCC t VEEt TDis TD+ TDMS Notes Directly connect this pin to the receiver ground plane +3.3V dc power for the receiver section Active high on this indicates a received optical signal. Receiver Dataout Bar. See recommended circuit schematic Receiver Dataout. See recommended circuit schematic +3.3V dc power for the transmitter section Directly connect this plan to the transmitter ground plane Transmitter Disable. Connect this pin to +3.3V TTL logic "1" to disable module To enable module connect to TTL logic low "0" Transmitter Data In. See recommended circuit schematic Transmitter Data In Bar. See recommended circuit schematic Mounting Studs. Connect to Chassis Ground RECOMMENDED CIRCUIT SCHEMATIC Vcc3.3V TDZ=50R LVPECL TD+ Z=5OR 10 9 8 7 6 TXDis(LVTTL) 1uH Vcc3.3V TDTD+ TDis Veet Vcct 10nF 10uF 1uH 10nF 10uF PHY DEVICE 1 2 3 4 5 Veer Vccr SD RDRD+ 10nF 10uF Vcc3.3V RD+ 100R Z=50R LVPECL RDZ=5OR SD TO LVTTL STAGE Note: 1. Veer and Veet are not internally connected to each other. 2. 50 line pattern and component placements on TD+/TD- and RD+/RD- lines shall be symmetrical for better impedance matching. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V2.0 Optoway PACKAGE DIAGRAM Units in mm TRML-9100FG 4 *********************************************************************************************************************************************************************** 1) Standard Case TRML-9100FG / TRML-9100FAG 2) Extended Case TRML-9100FEG / TRML-9100FAEG Note: Specifications subject to change without notice. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V2.0 |
Price & Availability of TRML-9100FAG
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |